<ins id="93lpp"></ins><cite id="93lpp"><noframes id="93lpp"><cite id="93lpp"></cite>
<var id="93lpp"><span id="93lpp"></span></var>
<ins id="93lpp"></ins>
<ins id="93lpp"></ins><thead id="93lpp"><video id="93lpp"></video></thead><ins id="93lpp"></ins>
<cite id="93lpp"><span id="93lpp"></span></cite>
<ins id="93lpp"></ins>
<ins id="93lpp"></ins>
在線客服
6 inch mixing mill

Advantage

1.The roller is made of chilled casting vanadium & titanium alloy iron which is hard and wear-resisting, the surface hardness is above 70degree, the surface coating is about 15mm.

2.Hard tooth gear reducer with well-design structure, low noise, high efficiency and long service life.

3.Self-aligning bearing is well matching with the bearing inside leakage-proof device. The sealers are made of high temperature,wear, oil resistance material,which have very good sealing effect.

4.All main electrics are imported, the alternating current contactor is Shilin brand. The switch and button are Taiwan Tend brand.

5.Circulating lubrication system solves the oil leakage problem. The feature of this system is easy to maintain,easy to replace.

6.This machine is installed with overload protection device which protect the machine will not broken if the machine is overload.The machine will reverse 1/3 round when press the emergency stop button,which sure the production safety.

7.The“U” shape frame is whole set casting, but other factory welded together.

8.The machine base is welded by national standard I steel.

Main parameter

Roller diameter(mm) 150
Roller length(mm) 450
Front roller speed(m/min) 8.6
Speed ratio 1:1.21
Max roller gap(mm) 6
Nip adjustment Manual
Mixing capacity(kg) 3-10
Power(kw) 7.5
Motor RPM(r/min) 980
Reducer ratio 45
Machine size(mm) 1400x800x1300
Machine weight(kg) 1200

Public equipment

Power: 380V 50Hz 

Cooling water supply: 2kg/cm2 0.4cbm/min

(in accordance with the production process can be configured forced cooling system)

Machine parts

Machine frame: one 

Transmission drive: one 

Nip adjustment device: one 

Pipes: one 

Electrics: one

Machine structure

(1)Units

Machine base Welded by national standard I steel and steel plate.
Machine frame Carbon steel casting with thermal treatment.
Rollers Roller is made of chilled casting vanadium & titanium alloy iron which is hard and wear-resisting. With special treatment to the inside,the temperature of roller surface will be even.?
Bearing SKF self-aligning bearing, CC model, which has long service life.
Bearing base whole set casting
Leakage-proof device Imported high temperature and wear resistance oil seal.

(2)ransmission drive

Main motor 7.5KW,6P, AC
Coupling Main motor and reducer are connected by coupling.
 Reducer Hard tooth with precision processing.
Ratio gear Front and back rollers are connected by ratio gear.

Top 国产精品免费看久久久8,伊人久久综在合线亚洲,五月丁香色播永久网站,人妻老妇乱子伦精品无码专区