<ins id="93lpp"></ins><cite id="93lpp"><noframes id="93lpp"><cite id="93lpp"></cite>
<var id="93lpp"><span id="93lpp"></span></var>
<ins id="93lpp"></ins>
<ins id="93lpp"></ins><thead id="93lpp"><video id="93lpp"></video></thead><ins id="93lpp"></ins>
<cite id="93lpp"><span id="93lpp"></span></cite>
<ins id="93lpp"></ins>
<ins id="93lpp"></ins>
在線客服
18inch mixing mill with blender(new product)

advantage

1. The roller is made of chilled casting vanadium & titanium alloy iron which is hard    and wear-resisting, the surface hardness is above 70degree, the surface coating is about 15mm.

2.Hard tooth gear reducer with well-design structure, low noise, high efficiency and long    service life.

3. Self-aligning bearing is well matching with the bearing inside leakage-proof device.  The sealers are made of high temperature,wear, oil resistance material,which have very good sealing effect.

4. All main electrics are imported, the alternating current contactor is Shilin brand. The switch and button are Taiwan Tend brand.

5. Circulating lubrication system solves the oil leakage problem. The feature of this system is easy to maintain,easy to replace.

6.This machine is installed with overload protection device which protect the machine will not broken if the machine is overload.

The machine will reverse 1/3 round when press the emergency stop button,which sure the production safety.

7. The “U” shape frame is whole set casting, but other factory welded together.

8. The machine base is welded by national standard I steel.

 

main parameters

Roller diameter (mm)

450

Roller length(mm)

1200

Front roller speed (m/min)

24.3

Speed ratio

1:1.27

Max roller gap(mm)

10

Nip adjustment

 Manual

Mixing capacitykg)

         30-50

Power (kw)

58

Motor RPMr/min

980

Reducer ratio

45

Reducer model

375+

Gear width

 input 70mm,output 140mm

Roller bearing diametermm

            300

Bearing model

352960YA

Bearing sizemm

420×300×174

Machine sizemm

5000x2200x2300

 Machine weightkg

11500

public equipment

1.  Power: 380V,50Hz,60kw

2.  Cooling water supply: 2kg/cm2   0.6cbm/min

 

 

machine parts

1.Machine frame:   one

2.Transmission drive:   one

3. Nip adjustment deviceone

4. Pipes:       one

5. Electrics:   one

machine structure

1Units

Machine base

Welded by national standard I steel and steel plate.

Machine frame

Carbon steel casting with thermal treatment.

 

 Rollers

Roller is made of chilled casting vanadium & titanium alloy iron which is hard and wear-resisting. With special treatment to the inside,the temperature of roller surface will be even.  

Bearing

SKF self-aligning bearing, CC model, which has long service life.

Bearing base

whole set casting

 Leakage-proof device

Imported high temperature and wear resistance oil seal.

 

2Transmission drive

Main motor

55KW,6P, AC

Coupling

Main motor and reducer are connected by coupling.

Reducer

Hard tooth with precision processing.

Ratio gear

Front and back rollers are connected by ratio gear.

 

Top 国产精品免费看久久久8,伊人久久综在合线亚洲,五月丁香色播永久网站,人妻老妇乱子伦精品无码专区